Take Pictures Further
Service and Support
Service & Support Main |  dc3200 Support |  User's Guide Contents |  Previous |  Next

KODAK DC3200 Digital Camera
User's Guide
Connecting the Camera to Your Computer

An RS-232 serial cable is provided, so you can connect your camera to a Windows-based computer. When connecting the camera, use a KODAK-specified AC adapter. For details about available accessories, ask a dealer of KODAK products, or visit our Web site.

  1. With the computer turned off, plug the appropriate end of the serial cable into an available 9-pin serial port on the computer.

    Serial ports are usually labeled COM1 and COM2, or A and B. If your computer has a 25-pin port, you need to attach a 9-pin adapter (available at your local computer store) to the port before attaching the serial cable to the computer.

    If the ports are not labeled, see your computer User's Guide for a diagram that illustrates the external ports.

  2. Plug the other end of the serial cable into the serial port on the side of your camera.

  3. Turn the computer on.

  4. Set the camera Power/Mode switch to the position.

  5. Press the MENU button to display the Menu screen on the LCD.

  1. Press a button until PC CONNECT is highlighted, and then press the SELECT button.

    The PC Connect screen appears.

  2. Press a button until ON is highlighted, and then press the SELECT button.

    The camera is ready to communicate with the computer.

    If you get a message on your computer stating that the camera is not connected, refer to the "Troubleshooting" chapter.

    To cancel the PC Connection mode, press the MENU button.

Previous |  Next

User's Guide Contents
Main Table of Contents
Using the Camera with Your Computer:
Connecting Camera to Computer | Using Picture Transfer Software | Navigating to Pictures