KODAK DC3200 Digital Camera
User's Guide
Using the DC3200 Picture Transfer Software

With the camera connected to your computer, you are ready to open and use the software that you installed. (See Installing Your Software.)

NOTE: The DC3200 Picture Transfer Software will display pictures from the camera internal memory unless a Picture Card is present in the camera. To display pictures from the internal memory, eject the Picture Card before starting the software. To display pictures from a Picture Card, insert the Picture Card before starting the software.

1. To start the DC3200 Picture Transfer Software, click the Start button on the desktop. From the Programs menu, choose Kodak, then DC3200, then KODAK DC3200.

   The DC3200 Picture Transfer Software communicates with the camera and retrieves pictures from the camera. Pictures are displayed as thumbnails.

   

2. Click the picture you want to copy to your computer.

   The border of the selected thumbnail picture turns light blue.

   To select all pictures, click the Select All button.

   To select multiple pictures, hold down the Ctrl key and click the desired pictures. To select all pictures that reside between two pictures, hold down the Shift key and click the first and last desired pictures.

3. Click the Save button.

   The Select Folder dialog box appears.

4. Specify the destination folder and click the OK button.

   The pictures are copied to your computer.

   • Unless you specify a different folder name and location, a folder is created based on the current date using the format [YYYY-MM-DD] in this location: c:\My Documents\My Pictures. Pictures are copied into this new folder.

     Example: If the date is August 1, 2000, the pictures are copied into the folder named "2000-08-01".

   • If a picture has the same name as a file in the destination folder, it is automatically saved using a name with a "_n" suffix (where "n" is a number).

     Example: If the file "DCP_0001.JPG" already exists, a picture having the same name is saved using the name "DCP_0001_1.JPG".

5. To exit the DC3200 Picture Transfer Software, click the Close button.

   After you save pictures to your computer, you can delete them from the camera memory or Picture Card to make room for new pictures.

   Changing Communication Settings--If connection errors occur, you may need to adjust the serial port and speed settings by following these steps:

6. Click the Settings button.

   The Communication Port Setting dialog box appears.

7. Adjust the serial port and port speed and click the OK button.

Previous |  Next

User's Guide Contents
Main Table of Contents
Using the Camera with Your Computer:
Connecting Camera to Computer | Using Picture Transfer Software | Navigating to Pictures